Hybrid body that reduces unnecessary parasitic resonance
Machined aluminium base
High-separation, wide-response dual moving coil
Special line contact stylus and solid boron cantilever
£899.99 (inc. VAT)
Specification
Type
Magnetic Core Moving Coil
Mounting
1/2” centers
Frequency Response
15 – 50,000Hz
Body Material
Aluminium
Channel Separation
30dB (1kHz)
Output Channel Balance
0.5dB (1kHz)
Output Voltage
0,5 mV (1 kHz, 5 cm/sec)
Vertical Tracking Angle
23°
Vertical Tracking Force Range
1.6 – 2.0g (1.8g standard)
Stylus Shape
Special Line Contact Stylus
Stylus Curvature Radius
40 x 7 µH
Stylus Construction
Nude square shank
Cantilever
0.26 mm Ø solid boron
Coil Impedance
12Ω (1kHz)
Coil Inductance
25µH (1kHz)
DC Resistance
12Ω
Static Compliance
35×10-6cm/dyne
Dynamic Compliance
18×10-6cm/dyne (100Hz)
Terminal Pins
Brass
Recommended Load Impedance
Min 100Ω
Weight
8.5g
Dimensions
17.3 (H) x 17.0 (W) x 25.6 (L) mm
Replacement Stylus
When the stylus is to be replaced, replace the entire cartridge. Take the used cartridge to your Audio-Technica Authorised Service Centre. The new cartridge, or any other model which is desired among the line-up of MC cartridges sold by Audio-Technica, are available at the stylus replacement price.
Accessories Included
1 non magnetic screw driver; 1 brush; 2 washers; 2 x 12 mm mounting screws; 2 Nuts; 2 x 18 mm mounting screws; 1 plastic protector; 1 set of PCOCC Lead Wires (AT6106)
Audio Technica AT-ART1000 DIRECT POWER STEREO MOVING COIL CARTRIDGE